M029 Yamaha Marine IMMO Tool for Adding/Reprogramming Keys (OBDSTAR)
$38.99
Description
OBDSTAR M029 Yamaha Marine IMMO Tool
M029 is designed for adding or reprogramming keys for a YAMAHA personal watercraft. It can finish key programming without the help of other devices.
Features:
- Key programming for YAMAHA Personal Watercraft (PWC) without the help of other devices.
- Up to five keys supported for a YAMAHA water runner.
Preparation Before Key Programming:
Yamaha personal watercrafts have 2 security systems, one for USA/CANADA, the other for areas outside of USA/CANADA. M029 is suitable for both systems. If you want to add a new key, please confirm your boat system first. The keys for the two security systems are not universal. Then how to know which system your personal watercraft has?
Please refer to the following two methods:
-
If you have an original key
- Judging from its appearance, please look at the back of the key
- USA/Canadian model is with an FCC/ICC mark
- The other model (areas outside of USA/CANADA) is with a CE mark
-
If you don't have an original key
- If your original keys have been lost, please check the label at the center of the receiver in the front of your water runner. It might be covered by the top rubber sometimes.
- US/Canadian Receiver: 6B6-00 mark
- Area outside US/Canada Receiver: 6B6-10 mark
Steps for Programming a New Key:
If you want to program a new key, all existing keys need to be reprogrammed during the same session—up to five keys for a water runner, supporting all keys lost.
-
Remove the access panel and find the remote service connector
- Please remove the access panel first, then locate the remote service connector (it’s two pins with sealing caps).
-
Connect the connector with M029
- Connect the remote service connector with M029.
-
Program keys
- Long press the lock or unlock button on a key to be programmed until its security or unlock LED starts flashing; then its programming process has been finished.
Downloads: